Large Lathe Specification Sheet
Common Specifications
The following specifications are applicable to all our
large swing lathes. This includes the original 2036, the short-bed 2016,
our flagship 2436 lathe and the shortbed 2416.
| Headstock / Spindle
Details: |
| » Morse Taper |
# 2 |
| » Inboard Thread (Metric) |
M33 x 3 ½ RH |
| » Outboard Thread (Metric) |
M33 x 3 ½ RH |
| » Through Hole - bore |
5/8" |
| » Bearings |
2 Front, 2 Rear |
| » Spindle Locking Mechanism |
Standard |
| » Safety Groove (Spindle) |
Standard |
| » Pulley |
3 Step, 10 groove poly-V |
| |
|
| Tailstock Details: |
| » Morse Taper |
# 3 |
| » Through Hole - bore (inches) |
5/16 |
| » Quill (inches) |
1 ½ dia. |
| » Ram Capacity |
4 inch travel |
| |
|
| Bed / Body Details: |
| » Bed Assembly |
Precision Machined, Stressed Relieved |
| » Bedways Gap (inches) |
1 ¾ |
| » Tube Construction (inches) |
10 ¾ dia. x 5/16 wall |
| » Paint |
Powder Paint (cream)
(50 - 70% more scuff resistance) |
| |
|
| Drive (Inverter) Specifications: |
| » A/C Variable Speed |
220V, Single Phase |
| » Horse Power |
1 ½, 2, or 3 |
| » Forward / Reverse |
Standard |
| » Dynamic Braking |
Standard |
Variable Specifications
The following specifications outline the differences between
the 2436, 2416, 2036, & 2016 lathes.
| Lathe Capacities |
2436 |
2416 |
2036 |
2016 |
| » Swing Over Bed (in) |
24 |
24 |
20 |
20 |
| » Swing Over Banjo (in) |
19 |
19 |
15 |
15 |
| » Distance Between Centers (in) |
36 |
16 |
36 |
16 |
| |
|
|
|
|
| Physical
Dimensions: |
| » Length (in) |
60 |
40 |
60 |
40 |
| » Width (in) |
31 ¼ |
31 ¼ |
31 ¼ |
31 ¼ |
| » Weight (lbs) |
~ 850 |
~ 650 |
~ 800 |
~ 600 |
| » Spindle Height (in) |
43, 44, 46, 48 |
43, 44, 46, 48 |
41, 42, 44, 46 |
41, 42, 44, 46 |