Vacuum Pump

In order to turn using vacuum, you will need a vacuum pump and/or motor. Due to the seriousness of injury that can occur due to vacuum pump failure, our R&D was extensive and thorough. For this reason, we decided on a superior vacuum pump for vacuum chucking purposes.

Oneway's Vacuum Pump has the following Specifications:

• 1/4 HP (Horse Power)
• Will draw 26½ inches of mercury
• 4.5 CFM at open
• Internal filters to keep sawdust and contaminants from entering the pump
• High quality, oil-less carbon vane pump to ensure no environmental contamination
• Low noise levels
• 110 Volt power reuqirement
• Made in USA

IMPORTANT: We recommend a MINIMUM draw of 20 INCHES of mercury.